İHSAN KOÇAK - OKK, Nakamura, Campro, Dirinler, Yang, CNC & HIRDAVAT - VERTICAL - CNV - CNV-1100

The cast iron construction was designed using "Finite Element Analysis (FEA) and Advanced 3D Software and is extremely rigid and provides extremely accurate machining capabilities as well as high metal removal rates.
The CNV series was ergonomically designed from the movable control panel to chip disposal and many other design features to reduce operator fatigue and increase working efficiency.
Box guideways on the Z-axis increases rigidity and minimizes vibration.
The X & Y axes utilize precision heavy loading linear guideways for high accuracy and high metal removal rates.
The counter-balance system is equipped with a guide rail to increase stability and avoid vibration during high feedrate or rapid traverse to ensure machiniing accuracy.
The extra wide base and massive saddle provides complete support for high accuracy and high metal removal rate macgining.
Three blocks on the X-axis which provides full support for working table.

CONTENT	MODEL	CNV-1100
TRAVEL
X axis travel	mm	1,100 (43.3")
Y axis travel	mm	580 (22.8")
Z axis travel	mm	560 (22")
Spindle nose to table surface	mm	90~650 (3.5"~25.5")
Spindle center to column surface	mm	630 (24.8")
TABLE
Table dimension	mm	1,200 × 550 (47.2" x 21.6")
Max. loading weight	kg	700 (1,543)
SPINDLE
Spindle motor	kw	7.5 / 11 (15)
Spindle speed	rpm	8,000 (10,000 / 12,000 / 15,000)
Spindle taper	type	7/24 taper No.40
AUTOMATIC TOOL CHANGER
No. of tools	-	24 (20T)
Max. tool weight	kg	7 (15)
Max. tool length	mm	250 (9.8")
Max. tool diameter	mm	Ø80 (3.1")
Tool diameter (Adjacent empty)	mm	Ø150 (5.9")
Tool change time (Tool to Tool)	sec.	2.5
Tool change time (Chip to Chip)	sec.	7
FEEDRATE
Rapid feedrate (X/Y/Z)	m/min	30 / 30 / 24 (1,181.1 / 1,181.1 / 994.8)
Cutting feedrate	m/min	10,000 (393.7 ipm)
OTHER
Floor plan (W×D)	mm	3,370 × 2,500 (132" x 98")
Machine weight	kg	6,700 (14,770)
Max. machine hight	mm	2,815 (110")
Power capacity	KVA	15
Air pressure source	kg/cm2	6~8 (85~113)

CAMPO reserves the right to modify the specifications without further notice.

Standard accessories
8,000 rpm belt type spindle	Rigid tapping
Spindle air blast system	Pre-tensioned ballscrews on 3 axes
Telescopic covers on 3 axes	Pneumatic system
Automatic lubrication system	Heat exchanger for electrical cabinet

Optional accessories
10,000 rpm / 12,000 rpm belt type spindle	10,000 rpm / 12,000 rpm / 15,000 rpm I.D.D spindle
Spindle oil cooler	Chip screw conveyor
Chain type chip conveyor	Coolant through spindle
Deep hole adaptor	Coolant flushing device
High pressure coolant pump	Linear scales
CNC rotary table	Automatic tool length measurement
Workpiece measurement	ATC cover
Fully rear cover	Air condition
CE modification	Transformer

Bilgi Formu

Foto Galeri

Video Galeri