tr
Ürünler
VERTICAL - CNV - CNV-1050
Özellikler
Bilgi Formu
Foto Galeri
Video Galeri
Adı:
VERTICAL - CNV
Modeli:
CNV-1050
Markası:
CAMPRO
Özellikler
Adı:
VERTICAL - CNV
Modeli:
CNV-1050
Markası:
CAMPRO
Campro CNV Series is designed for economy and efficiency.
 
  • Campro CNV Series is designed for economy and efficiency.
  • The cast iron construction was designed  using "Finite Element Analysis (FEA) and Advanced 3D Software and is extremely rigid and provides extremely accurate machining capabilities as well as high metal removal rates.
  • The CNV series was ergonomically designed from the movable control panel to chip disposal and many other design features to reduce operator fatigue and increase working efficiency.
  • Liner guideways on all three axes provide high speed yet rigid machining capabilities for a wide range of maching requirements from small lot size to mass prouduction for the automotive industry.
  • CNV-850 / 1050 are equipped with heavy duty roller type liear guideways on the Z-Axis.
  • All axes are equipped with direct drive servo motor with coupling.
  • The Z-axis uses a servo motor brake instead of a counterbalance which provides superior surface finishes and accuracy.
CONTENT MODEL CNV-1050
TRAVEL    
X axis travel mm 1050 (41.3")
Y axis travel mm 540 (21.2")
Z axis travel mm 520 (20.4")
Spindle nose to table surface mm 110~630 (43"~24.8")
Spindle center to column surface mm 630 (24.8")
TABLE    
Table dimension mm 1,150 × 520 (45.2" x 20.4")
Max. loading weight kg 600 (1,322)
SPINDLE    
Spindle motor kw 7.5 / 11 (15)
Spindle speed rpm 8,000 (10,000 / 12,000 / 15,000)
Spindle taper type 7/24 taper No.40
AUTOMATIC TOOL CHANGER    
No. of tools - 24 (20T)
Max. tool weight kg 7 (15)
Max. tool length mm 250 (9.8")
Max. tool diameter mm Ø80 (3.1")
Tool diameter (Adjacent empty) mm Ø150 (5.9")
Tool change time (Tool to Tool) sec. 2.5
Tool change time (Chip to Chip) sec. 7
FEEDRATE    
Rapid feedrate (X/Y/Z) m/min 30 / 30 / 30 (1,181.1 / 1,181.1 / 1,181.1)
Cutting feedrate m/min 10,000 (393.7 ipm)
OTHER    
Floor plan (W×D) mm 3,330 × 2,260 (131" x 88")
Machine weight kg 5,700 (12,566)
Max. machine hight mm 2,680 (105")
Power capacity KVA 15
Air pressure source kg/cm2 6~8 (85~113)
CAMPO reserves the right to modify the specifications without further notice.
 
 
Standard accessories
8,000 rpm belt type spindle Rigid tapping
Spindle air blast system Pre-tensioned ballscrews on 3 axes
Telescopic covers on 3 axes Pneumatic system
Automatic lubrication system Heat exchanger for electrical cabinet
   
Optional accessories
10,000 rpm / 12,000 rpm belt type spindle 10,000 rpm / 12,000 rpm / 15,000 rpm I.D.D spindle
Spindle oil cooler Chip screw conveyor
Chain type chip conveyor Coolant through spindle
Deep hole adaptor Coolant flushing device
High pressure coolant pump Linear scales
CNC rotary table Automatic tool length measurement
Workpiece measurement ATC cover
Fully rear cover Air condition
CE modification Transformer
Bilgi Formu
Ön Sipariş Formu
Ad Soyad
Firma
Telefon
E Posta
Adres
Mesajınız
 
Foto Galeri
Video Galeri